PPG Paints has launched a brand-new formulation of their much-loved flagship Endure Interior paint. Significant advancements in technology make this one of the best performing premium paints now on the market, delivering outstanding protection, and backed by a Lifetime Guarantee. Up until now, choosing a paint has necessitated compromising on one or more of the key elements of the perfect product. For example, a paint that washes well and doesn’t leave any shiny patches may never resist the initial stain, so the mark remains; but with our new premium Endure Interior range, our DIY painters can have the lot! Endure Interior now excels in the eight areas that combine to make it one of the most advanced paints on the market. Because after all, protecting beauty needs a tough paint.
Ensure surfaces to be painted are clean, dry and free of contamination. Walls should be wiped down with a mild detergent and rinsed clean with fresh water, even if they don't appear to be dirty, to ensure removal of any surface contamination and ensure the paint has a clean surface to adhere to.
Seal new or bare plaster, bare wallboards or Gyprock with PPG Architectural Coatings 3 in 1.
Remove all loose or flaking paint, wash all areas thoroughly to remove any surface contamination. Treat surfaces affected by mould with chlorine bleach diluted one part bleach to four parts water. Rinse clean with fresh water. Spot repair any bare areas such as filled holes as per directions for new work.
Apply one liberal coat by brush, roller or spray. Do not overspread. Keep brushes and rollers working freely by rinsing occasionally in clean water.
Water wash up, away from drains.
Up to 16m²/litre, depending on nature of surface. Coverage will be lower on rough or absorbent surfaces.
Recoat after 2 hours at 25°C and 50% relative humidity.
Stir paint with a 25mm wide flat stirrer in a circular lifting motion for at least 5 minutes before use. It is always recommended to stir paint before use to ensure that the colour tints are dispersed evenly throughout the paint.
Do not use at temperatures below 10°C, above 35°C or when humidity is excessive.