PPG PaintsĀ Easycoat Prep is a premium quality sealer, primer and undercoat perfect for bare interior timber as well as exterior and interior paper-faced plasterboard. The only paint featuring Microban technology, it keeps your home safe from fungal growths and triggers of asthma or allergies.
Discover more at thecleanerhome.com
Sealer Primer Undercoat
1L
4L
10L
15L
Surfaces must be clean, dry and free from all surface contamination. Treat mould with bleach then rinse with fresh water. Fill in the surface defects with suitable filler, putty or sealant. Avoid using masking tape on wall and ceiling paints.
Surfaces must be clean and dry. For paper faced plasterboard, masonry and timber first apply PPG Paints 3 in 1.
Remove all loose and flaking paint and sand glossy or enamel surfaces thoroughly. Use PPG 3 in 1 for priming bare areas, for painting over patchy or contrasting colours or painting over enamel surfaces.
Apply two coats by brush, roller or spray.
Scrape excess paint from equipment into a disposable container. Clean brushes and equipment with water immediately after use.
Up to 16mĀ²/litre, depending on nature of surface.
Recoat after 2 hours at 25Ā°C (allow 4 hours in cold or humid areas).
Stir paint with a broad flat stirrer in a circular lifting motion for at least 5 minutes before use and continue to stir at regular intervals during application.
Do not use at temperatures below 10Ā°C or above 35Ā°C.
Ā